Jiangsu Longyuan Electrical Equipment Co.,Ltd

Jiangsu Longyuan Electrical Equipment Co.,Ltd

Conductor ACCC Paris

Conductor ACCC Paris

Product name:Conductor ACCC Paris



code name Paris
Mechanical Specifications    Metric   Imperial
Nominal Aluminum Cross-sectional Area* 813.7 mm2 1605.8 kcmil
Nominal Diameter of Composite Core (CTC Part Number 200-006) 8.76 mm 0.345 in.
Nominal Cross-sectional Area of Core 60.3 mm2 0.093 in2
Overall Diameter of Conductor 34.16 mm 1.345 in.
Nominal Cross-sectional Area of the Conductor 874.0 mm2 1.355 in2
Ultimate Tensile Strength of Conductor1,2 175.9 kN 39.5 kips
Rated Strength of Core - 313 ksi (2158 MPa) 130.2 kN 29.3 kips
Core Nominal Mass per unit length 98 kg/km 66 lb/kft
Conductor Nominal Mass per unit length 2365.4 kg/km 1589.7 lb/kft
Aluminum Nominal Mass per unit length** 2267.4 kg/km 1523.9 lb/kft
Maximum Allowable Operating Temperature at Surface4 180 356
Coefficient of Linear Expansion Above Thermal Kneepoint 1.45E-06 / 8.06E-07 /
Coefficient of Linear Expansion Below Thermal Kneepoint 2.03E-05 / 1.13E-05 /
Final Modulus of Elasticity Above Thermal Kneepoint 116.0 GPa 16.8 Msi
Final Modulus of Elasticity Below Thermal Kneepoint 62.0 GPa 9.0 Msi
Electrical Specifications    Metric   Imperial
Nominal Resistivity of Aluminum at 20ºC, DC 63% IACS 0.0345 ohm/km 0.0555 ohm/mile
Temperature Coefficient of Resistance 0.00403   0.00403  
Frequency 50 Hz 60 Hz
AC Nominal Resistance at 25ºC 0.0368 ohm/km 0.0604 ohm/mile
AC Nominal Resistance at 75ºC 0.0435 ohm/km 0.0710 ohm/mile
AC Nominal Resistance at 180ºC 0.0576 ohm/km 0.0933 ohm/mile
AC Current Rating at Given Temperature3   1480 @ 100C & 50 Hz
  2254 @ 180C & 50 Hz
GMR (estimated) 0.01 m 0.0000 ft
Inductive Reactance 0.629 ohm/km 1.215 ohm/mile
Capacitive Reactance 0.165 Mohm-km 0.085 Mohm-mile

  • ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 837.6 sq. mm (1653 kcmil).
  • ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
2) Strength at ambient temperature.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient  temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation.
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
  • The information contained herein is offered in good faith. The actual configuration of a given size may vary between conductor manufacturers and may result in slight variations in some of the indicated values.


Related Products :

Conductor ACCC Mumbai

Conductor ACCC Mumbai

Conductor ACCC Glasgow

Conductor ACCC Glasgow

Conductor ACCC Berlin (HS Madrid)

Berlin (HS Madrid)
Conductor ACCC Berlin (HS Madrid)

Conductor ACCC Munich

Conductor ACCC Munich

Conductor ACCC Hamburg

Conductor ACCC Hamburg

Conductor ACCC Bordeaux

Conductor ACCC Bordeaux

Conductor ACCC Oslo

Conductor ACCC Oslo

Conductor ACCC Kolkata

Conductor ACCC Kolkata
Home   |    About Us   |    News   |    Products   |    Service   |    FAQ   |    Feedback   |    Contact Us   |    SiteMap
Copyright (c) 2013 Jiangsu Longyuan Electrical Equipment Co.,Ltd All Rights Reserved