Jiangsu Longyuan Electrical Equipment Co.,Ltd

Jiangsu Longyuan Electrical Equipment Co.,Ltd
Products

Conductor ACCC Munich

Conductor ACCC Munich

Product name:Conductor ACCC Munich

Item:Munich

Details:

code name Munich
Mechanical Specifications    Metric   Imperial
Nominal Aluminum Cross-sectional Area* 733.2 mm2 1446.9 kcmil
Nominal Diameter of Composite Core (CTC Part Number 200-007) 9.53 mm 0.375 in.
Nominal Cross-sectional Area of Core 71.3 mm2 0.111 in2
Overall Diameter of Conductor 32.85 mm 1.293 in.
Nominal Cross-sectional Area of the Conductor 804.5 mm2 1.247 in2
Ultimate Tensile Strength of Conductor1,2 195.0 kN 43.8 kips
Rated Strength of Core - 313 ksi (2158 MPa) 153.8 kN 34.6 kips
Core Nominal Mass per unit length 132 kg/km 89 lb/kft
Conductor Nominal Mass per unit length 2169.5 kg/km 1458.1 lb/kft
Aluminum Nominal Mass per unit length** 2037.5 kg/km 1369.4 lb/kft
Maximum Allowable Operating Temperature at Surface4 180 356
Coefficient of Linear Expansion Above Thermal Kneepoint 1.61E-06 / 8.94E-07 /
Coefficient of Linear Expansion Below Thermal Kneepoint 1.96E-05 / 1.09E-05 /
Final Modulus of Elasticity Above Thermal Kneepoint 112.3 GPa 16.3 Msi
Final Modulus of Elasticity Below Thermal Kneepoint 62.8 GPa 9.1 Msi
Electrical Specifications    Metric   Imperial
Nominal Resistivity of Aluminum at 20ºC, DC 63% IACS 0.0384 ohm/km 0.0618 ohm/mile
Temperature Coefficient of Resistance 0.00403   0.00403  
Frequency 50 Hz 60 Hz
AC Nominal Resistance at 25ºC 0.0405 ohm/km 0.0661 ohm/mile
AC Nominal Resistance at 75ºC 0.0480 ohm/km 0.0781 ohm/mile
AC Nominal Resistance at 180ºC 0.0638 ohm/km 0.1032 ohm/mile
AC Current Rating at Given Temperature3   1392 @ 100C & 50 Hz
  2113 @ 180C & 50 Hz
GMR (estimated) 0.01 m 0.0000 ft
Inductive Reactance 0.631 ohm/km 1.219 ohm/mile
Capacitive Reactance 0.167 Mohm-km 0.087 Mohm-mile











































  • ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 754.8 sq. mm (1489.5 kcmil).
  • ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
2) Strength at ambient temperature.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient  temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation.
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
  • The information contained herein is offered in good faith. The actual configuration of a given size may vary between conductor manufacturers and may result in slight variations in some of the indicated values.

[Next:Mumbai]→

Related Products :

Conductor ACCC Milan

Milan
Conductor ACCC Milan

Conductor ACCC Kolkata

Kolkata
Conductor ACCC Kolkata

Conductor ACCC Dublin

Dublin
Conductor ACCC Dublin

Conductor ACCC Brussels

Brussels
Conductor ACCC Brussels

Conductor ACCC Antwerp

Antwerp
Conductor ACCC Antwerp

Conductor ACCC Monte Carlo

Monte Carlo
Conductor ACCC Monte Carlo

Conductor ACCC  Lisbon

Lisbon
Conductor ACCC Lisbon

Conductor ACCC Gdansk

Gdansk
Conductor ACCC Gdansk
Home   |    About Us   |    News   |    Products   |    Service   |    FAQ   |    Feedback   |    Contact Us   |    SiteMap
Copyright (c) 2013 Jiangsu Longyuan Electrical Equipment Co.,Ltd All Rights Reserved