Jiangsu Longyuan Electrical Equipment Co.,Ltd

Jiangsu Longyuan Electrical Equipment Co.,Ltd
Products

Conductor ACCC Milan

Conductor ACCC Milan

Product name:Conductor ACCC Milan

Item:Milan

Details:

code name Milan
Mechanical Specifications    Metric   Imperial
Nominal Aluminum Cross-sectional Area* 567.7 mm2 1120.3 kcmil
Nominal Diameter of Composite Core (CTC Part Number 200-006) 8.76 mm 0.345 in.
Nominal Cross-sectional Area of Core 60.3 mm2 0.093 in2
Overall Diameter of Conductor 29.10 mm 1.146 in.
Nominal Cross-sectional Area of the Conductor 628.0 mm2 0.973 in2
Ultimate Tensile Strength of Conductor1,2 162.1 kN 36.4 kips
Rated Strength of Core - 313 ksi (2158 MPa) 130.2 kN 29.3 kips
Core Nominal Mass per unit length 98 kg/km 66 lb/kft
Conductor Nominal Mass per unit length 1686.1 kg/km 1133.2 lb/kft
Aluminum Nominal Mass per unit length** 1588.1 kg/km 1067.3 lb/kft
Maximum Allowable Operating Temperature at Surface4 180 356
Coefficient of Linear Expansion Above Thermal Kneepoint 1.45E-06 / 8.06E-07 /
Coefficient of Linear Expansion Below Thermal Kneepoint 1.93E-05 / 1.07E-05 /
Final Modulus of Elasticity Above Thermal Kneepoint 116.0 GPa 16.8 Msi
Final Modulus of Elasticity Below Thermal Kneepoint 63.6 GPa 9.2 Msi
Electrical Specifications    Metric   Imperial
Nominal Resistivity of Aluminum at 20ºC, DC 63% IACS 0.0494 ohm/km 0.0795 ohm/mile
Temperature Coefficient of Resistance 0.00403   0.00403  
Frequency 50 Hz 60 Hz
AC Nominal Resistance at 25ºC 0.0514 ohm/km 0.0835 ohm/mile
AC Nominal Resistance at 75ºC 0.0612 ohm/km 0.0991 ohm/mile
AC Nominal Resistance at 180ºC 0.0818 ohm/km 0.1320 ohm/mile
AC Current Rating at Given Temperature3   1191 @ 100C & 50 Hz
  1797 @ 180C & 50 Hz
GMR (estimated) 0.01 m 0.0000 ft
Inductive Reactance 0.639 ohm/km 1.233 ohm/mile
Capacitive Reactance 0.174 Mohm-km 0.090 Mohm-mile











































  • ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 584.4 sq. mm (1153.3 kcmil).
  • ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
2) Strength at ambient temperature.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient  temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation.
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
  • The information contained herein is offered in good faith. The actual configuration of a given size may vary between conductor manufacturers and may result in slight variations in some of the indicated values.

←[Previous:Monte Carlo] [Next:Madrid]→

Related Products :

Conductor ACCC Prague

Prague
Conductor ACCC Prague

Conductor ACCC Casablanca

Casablanca
Conductor ACCC Casablanca

Conductor ACCC Reykjavik

Reykjavik
Conductor ACCC Reykjavik

Conductor ACCC Copenhagen

Copenhagen
Conductor ACCC Copenhagen

Conductor ACCC Rome

Rome
Conductor ACCC Rome

Conductor ACCC Dublin

Dublin
Conductor ACCC Dublin

Conductor ACCC Stockholm 2L

Stockholm 2L
Conductor ACCC Stockholm 2L

Conductor ACCC Gdansk

Gdansk
Conductor ACCC Gdansk
Home   |    About Us   |    News   |    Products   |    Service   |    FAQ   |    Feedback   |    Contact Us   |    SiteMap
Copyright (c) 2014 Jiangsu Longyuan Electrical Equipment Co.,Ltd All Rights Reserved